The car parks and roads at Melbourne Airport are very busy today

All car parks at Melbourne Airport are nearly sold out today. If you don't have a booking, consider alternate forms of transport to come to the airport. If you do have a booking, allow extra time to find a spot and have your QR code ready for a smooth entry. If using the Terminal 4 car park including pick up and drop off, please note Naarm Way is closed until mid November. To access the T4 car park, please exit the Tullamarine Freeway at Exit 18 on Mercer Drive, then turn right at the Airport Drive roundabout and follow the signs to the Terminal 4 car park. Proceed to Level 2 for drop-offs or Level 1 for pick-ups. Due to ongoing construction in the Terminal 1,2,3 car park pick-up and drop-off areas, passengers should plan for potential delays of up to an hour during peak times if you are being dropped off by a loved one, taxi or Uber.  Thank you for your patience while we are building your airport.

Search
Day Mode On
Looking for something?
Parking
Contractors - introduction

Welcome to Melbourne Airport

Below are our key requirements when ‘Working at the Airport’

  1. Before you commence any works at Melbourne Airport, ensure you meet with the person assigning you to do the work so you can familiarise yourself with the area, what access is required and any other information to assist you with working at Melbourne Airport.
  2. Review our APAM Technical Standards, Guidelines and procedures in conjunction with the relevant Australian Standards, as additional requirements may be required.
  3. If an ASIC (airport identification that allows you to work airside or in a sterile area) or visitor pass is required refer to Access Section.
  4. Some works require a Planning approval before a building approval can be processed refer to; https://www.melbourneairport.com.au/Corporate/Planning-projects/Planning-approvals.
  5. Visit the Airport Building Control, a Government body to obtain approval of works to be conducted, this step is to be completed before applying for Melbourne Airport Building Approval https://infrastructure.gov.au/aviation/airport/airport-building-control/abco/index.aspx
  6. Go to Melbourne Airport ‘Building Approvals’ after you receive the ABC determination. Ensure that all the sections within ‘Preparing your application’ are read to ensure a successful completion of your application.
  7. Read through each section which will provide valuable information to help make your visit here easier.

Report an Incident or Hazard at Melbourne Airport

Access

A contractor requiring to enter a 'Restricted or Sterile Area' must be approved for access prior to undertaking work.

Local permits

Local permits are required for certain work on Melbourne Airport grounds.

Safety

The APAC Total Safety Culture underpins everything we do incorporating people, practices and the environment. All relevant safety documentation can be found here.

LAANs

Land Access Activity Notices (LAAN) are required for certain telecommunications works.

Staff parking

View further information on how to apply for staff or contractor parking at Melbourne Airport.