The car parks at Melbourne Airport are busy

The car parks at Melbourne Airport are busy this week The Value Car Park is nearly sold out Thursday, Friday, Saturday, Sunday and Monday. If you do have a car park booking, please arrive 30 minutes earlier than usual and have your QR code ready for a smooth entry and exit. Due to ongoing construction in the Terminal T1 T2 T3 car park pick-up and drop-off areas, passengers should plan for potential delays of up to an hour during peak times if you are being dropped off by a loved one, taxi or Uber. To avoid congestion, we recommend using the equivalent pick-up and drop-off facilities at nearby Terminal 4 car park, which is a 10-minute walk to and from Terminals 1, 2, and 3. Simply drive to the Terminal 4 Car Park and proceed to Level 2 for drop-offs or Level 1 for pick-ups. Thank you for your patience while we are building your airport.

Search
Day Mode On
Looking for something?
Parking
Contractors - introduction

Welcome to Melbourne Airport

Below are our key requirements when ‘Working at the Airport’

  1. Before you commence any works at Melbourne Airport, ensure you meet with the person assigning you to do the work so you can familiarise yourself with the area, what access is required and any other information to assist you with working at Melbourne Airport.
  2. Review our APAM Technical Standards, Guidelines and procedures in conjunction with the relevant Australian Standards, as additional requirements may be required.
  3. If an ASIC (airport identification that allows you to work airside or in a sterile area) or visitor pass is required refer to Access Section.
  4. Some works require a Planning approval before a building approval can be processed refer to; https://www.melbourneairport.com.au/Corporate/Planning-projects/Planning-approvals.
  5. Visit the Airport Building Control, a Government body to obtain approval of works to be conducted, this step is to be completed before applying for Melbourne Airport Building Approval https://infrastructure.gov.au/aviation/airport/airport-building-control/abco/index.aspx
  6. Go to Melbourne Airport ‘Building Approvals’ after you receive the ABC determination. Ensure that all the sections within ‘Preparing your application’ are read to ensure a successful completion of your application.
  7. Read through each section which will provide valuable information to help make your visit here easier.

Report an Incident or Hazard at Melbourne Airport

Access

A contractor requiring to enter a 'Restricted or Sterile Area' must be approved for access prior to undertaking work.

Local permits

Local permits are required for certain work on Melbourne Airport grounds.

Safety

The APAC Total Safety Culture underpins everything we do incorporating people, practices and the environment. All relevant safety documentation can be found here.

LAANs

Land Access Activity Notices (LAAN) are required for certain telecommunications works.

Staff parking

View further information on how to apply for staff or contractor parking at Melbourne Airport.